View MIC-3393_4689970.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MIC-3393
NEW

6U CompactPCI Intel(R) Xeon(R) Quad/ Dual Core Processor Blade Features
Supports 45 nm Intel(R) Xeon(R) Low Voltage/Ultra Low Voltage processor Intel(R) 5100MCH chipset supports 1066/1333 MHz FSB Up to 4 GB (DDR2 533/667) ECC memory Optimized design in one or two slots SBC with USB Flash Drive, and 2.5" SATA HDD/CompactFlash socket Optional Extension Module on 8HP version supports two XMCs, PMCs or 2.5" SATA HDDs TPM, three GbE ports, six SATA ports, four USB 2.0 ports, one VGA port, three RS-232 ports, one PS/2 connector, and PCIe x1, PCIe x4 interfaces to the Rear Transition Module (RTM) Built-in Intel(R) I/OAT technology for enhanced I/O performance PICMG 2.16 R1.0, PICMG 2.9 R1.0, PICMG 2.1 R2.0 compliant

RoHS
COMPLIANT
Introduction
2002/95/EC
Experience true server class performance on CompactPCI. Using Intel 45nm 64-bit Xeon technology with up to four cores at 2.33 GHz combined with the powerful San Clemente chipset, the MIC-3393 blade boosts computing and I/O performance deploying the latest virtualization, multi-threading and I/OAT acceleration techniques. Enhanced Xeon(R) packaging, front side bus parity, onboard, soldered DRAM with ECC support and RASUM features integrated in the 5100 MCH combined with PICMG2.9, IPMI-based management make the MIC-3393 a highly available and reliable high performance computing engine. The comprehensive I/O subsystem includes an onboard USB flash disk, a 2.5" SATA HDD or CompactFlash slot, three advanced Gigabit Ethernet controllers, two UARTs, USB ports and a TPM. The addition of PCIe links to the RTM further enhances versatility compared to previous generation blades resulting in best-in-class connectivity. The RIO-3311 RTM module supports one PS/2 connector with both keyboard and mouse ports, three USB ports, two RS-232 ports, 2 SATA ports, a PCIe based server graphics controller with VGA port, a USB port for USB NAND flash module, and alternate cabling for the three Gigabit Ethernet ports of the MIC-3393. In case the SATA disk drives and SATA RAID support of the ICH9R do not meet performance and reliability requirements, the RIO-3311 SAS version supports a 4-port SAS controller with RAID and failover support. The MIC-3393 is outfitted with single slot (4HP) or dual slot (8HP) front panels to match CPU performance, CPU power dissipation, and system cooling capabilities. The 8HP version of the blade can be extended with a MIC-3312 mezzanine module which can carry two XMCs/PMCs or two 2.5" SATA HDDs to support enhanced I/O modularity and additional mass storage options.
Specifications
Processor System CPU Chipset Front Side Bus BIOS Technology Max. Capacity Socket J1~J2 Connectors J3 Connector J5 Connector Bridge Mode Controller Interface I/O Connector Controller Interface I/O Connector Controller Resolution Type Channels Type Channels Quad-Core/Dual-Core Intel(R) Xeon(R) processor LV or Dual-Core Intel(R) Xeon(R) processor ULV up to 2.66 GHz Intel(R) 5100MCH/ICH9R (San Clemente) 1066/1333 MHz with parity protection Redundant AMI 2MByte SPI flash Dual channel DDR2 533/667 MHz with ECC 2 GB onboard, max. 4 GB total SORDIMM x2 64-bit/66 MHz PCI local bus + RTM PICMG2.16 + RTM RTM Pericom PI7C9X130DNDE + PLX PCI 6540CB Sytem Master/Drone (Stand alone) 2 Intel(R) 82574L single-port Gigabit Ethernet controllers 10/100/1000Base-TX Ethernet PICMG2.16 x 1, RJ-45 x1 or RTM x 2 Intel(R) ICH9R MAC and Intel(R) 82566DM Gigabit Ethernet PHY 10/100/1000Base-TX Ethernet RJ-45 x 1 or RTM x 1 XGI Volari Z11 PCIe Server graphics with 32 MB VRAM Up to 1600 x 1200, 64k hi-color at 70Hz SATA-II 1 channel. to onboard SATA HDD carrier or CF disk carrier 2 channels. to RTM 2 channels to extension module (8HP only) USB 1 to onboard 1 GB flash disk
Memory
CompactPCI Interface
Ethernet
Graphics (on RTM)
Storage
All product specifications are subject to change without notice
Last updated : 27-Oct-2009
MIC-3393 Specifications
Front I/O USB 2.0 COM LAN Front Panel LEDs Buttons USB COM LAN SATA PCIe Others CMOS Boot options Console others Output Interval Controller Controller Compatibility Configuration TDP (max./typ.) Dimensions & Weight Temperature Humidity Vibration Bump Altitude Conformance NEBS Level 3 Standards 2 type A 1 RS-232 on RJ-45 2 10/100/1000 Mbps on RJ-45 x 1 blue/yellow for Hot Swap/HDD, x 1 green for Master/Drone, x 1 yellow BMC Heartbeat, and x 1 green for Power CPU and BMC reset buttons 4 ports 2 ports 3 10/1000/1000 Mbps 2 ports 1 PCIe x 1, 1 PCIe x 4 PS/2 for keyboard & mouse Battery backed up with backup copy in EEPROM SATA, SAS, USB ports, USB flash disk, network (PXE) VGA or console redirection over COM Port, SoL supported by BMC Supports operation without disk, keyboard, video Local Reset and Interrupt Programmable 1s ~ 255s Winbond(R) 83627DHG: voltages, CPU, chipset, board temperature Renesas(R) H8S 2167, IPMIv2.0 compliant Windows(R) XP 32/64 bit, Linux 4HP 8HP 60W / <50W 90W / <75W 6U /1 slot width (4HP), 233.35 x 160 x 20 mm (9.2" x 6.3" x 0.8"), 1.03 kg (2.27lb) 6U /2 slots width (8HP), 233.35 x 160 x 40 mm (9.2" x 6.3" x 1.6"), 1.42kg (3.14lb) Operating Non-operating 0 ~ 55 C (32 ~ 122 F) -40 ~ 85 C (-40 ~ 185 F) 95 %@ 40 C, non-condensing 95 %@ 60 C, non-condensing 5-500Hz, 2Grms 5 ~ 500Hz, 3.5Grms 15G, 6ms (without on-board 2.5" SATA HDD) 4,000m above sea level FCC Class A, CE, RoHS Designed for GR-63-CORE and GR-1089-CORE PICMG2.0 R3.0, PICMG2.1 R2.0, PICMG2.9 R1.0, PICMG2.16 R1.0
Rear I/O
BIOS Watchdog Timer Hardware Monitor BMC Operating System Power Requirement Physical
Environment
Regulatory Compliance
Supported CPU Configurations
Intel CPU Model Number L5408 L5238 L5215 L3014 CPU architecture Harpertown (45 nm) Wolfdale (45 nm) Wolfdale (45 nm) Wolfdale (45 nm) # cores 4 2 2 1 Freq. 2.13 GHz 2.66 GHz 1.86 GHz 2.4 GHz Cache 12 MB 6 MB 6 MB 3 MB FSB 1066 MHz 1333 MHz 1066 MHz 1066 MHz CPU TDP 40W 35W 20W 30W Required airflow for single slot width 50CFM 40CFM 20CFM 50CFM* Required airflow for dual slot width 30CFM 25CFM 15CFM 30CFM
*Note: These CPUs support extended case temperature and are qualified for NEBS environments **Note: Strong airflow required for the L3014 CPU is restricted to its thermal specification (Tc 60 C)
Recommended Configurations
CPU Board MIC-3393A Series MIC-3393B, MIC-3393C Series Extension Module MIC-3312-A1E, MIC-3312A-A2E Rear I/O Board RIO-3311-A1E, RIO-3311-A2E RIO-3311-A1E, RIO-3311-A2E Enclosure MIC-3042, MIC-3043 Series MIC-3042, MIC-3043 Series
Ordering Information
Front Panel LAN COM USB XMC/PMC Knockout MIC-3393A-M2E 2 1 2 MIC-3393B-M2E 2 1 2 2 MIC-3393C-M2E 2 1 2 *Note: Use of single rank, dual die package stack (3.8 mm) SORDIMM is advised **Note: CF board is included as accessory System Board RTM Model Number Rear Panel LAN COM VGA PS/2* USB MiniSAS 1 USB 1 1 1 Memory 2 GB 2 GB 2 GB Main On-board Features SATA HDD Socket CF Socket 1 1 1 1 1 1 Slot Width 1 2 2
USB Flash**
RIO-3311-A1E 3 2 1 1* 2 RIO-3311-A2E 3 2 1 1* 2 *Note: One PS/2 port carries the signals for both K/B and mouse. Y cable is included. **Note: Use of Advantech EmbCore USB 2.0 Disk Module (Type C) recommended
On-board Header/Socket/Connector SAS (SATA SATA Slot Width interface) 2 4 1 2 1
Conn. J1,J3,J5 J1,J3,J5
Online Download www.advantech.com/products
MIC-3393 Board Diagram
DDR2 SODIMM 533/667 ECC DDR2 onboard 533/667 ECC DDR2 SODIMM 533/667 ECC DDR2 onboard 533/667 ECC ICS Clock generator HWM / Sensors
SMB Channel 1 PCIex4 PCIex8 SATA-II (2x) USB 2.0 (2x) PCIex1 SATA-II (2x) USB 2.0 (4x) LPC Channel 0 FSB
Intel Xeon SC/DC/QC 52xx/53xx 54xx series
PCIex4
PLX6540
PCI-X 64/66
PCI-X 64/66
J1/J2 Hot Swap Controller
+12V, +5V, +3.3V
San Clemente
PCIe2 PCI-X
All platform clocks
Extension Module XTM (8HP only)
Flash disk
USB 2.0
I2C
BMC
ICH9R
SuperIO
PCIex1 PCIex1
UART (2x)
from FPGA to FPGA
PS/2 (KB/MS) UART (2x)
i82574L
J5 J3
MUX
TPM
SPI 2MByte
LOM
MUX
i82566
UART, BUS IF
RS-232
Lattice FPGA LFXP2
UART (2x) UART (2x)
to RTM From SuperIO SATA-II
JMicro SATA2 PATA
PATA
Compact Flash
User LEDs
User + Reset buttons
Handle SW
USB 2.0 USB 2.0
SATA-II
Hard Disk Drive
Adapter, CF and HDD are mutually exclusive
Ordering Information
XTM Model Number MIC-3312-A1E MIC-3312-A2E XMC/PMC 2 On-board Header/Socket/Connector SATA HDD 2
One SATA HDD/ CompactFlash socket
Two RJ-45 Gigabit LAN ports One RJ-45 COM port Two XMC/PMC knockouts (MIC-3393B only) One passive North Bridge heatsink One passive CPU heatsink
Memory DIMM sockets
Two USB 2.0 ports
All product specifications are subject to change without notice
Last updated : 27-Oct-2009

▲Up To Search▲

Price & Availability of MIC-3393

	To Download MIC-3393 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .